Abrasive Grain Recycle System

The Slurry Recycle System is for recovering and recycling abrasive grain slurry used on a wiresaw for slicing ingots and the like.

Outline of Slurry Recycling System

① Used abrasive grain slurry discharged from the wire saw is separated by a first decanter to recover abrasive grains.

② The primary separation liquid is further separated by a second decanter to recover coolant; chips are discarded.

③ Recovered abrasive grains and coolant are mixed, a certain amount of new slurry (new abrasive grains and coolant) is added when necessary to blend and make a regenerated slurry.
※The above process is fully automated.

Standard specifications

Type		TU-015DT	TU-015TT	TU-030DT	TU-030TT
Item	Unit	TU-015DT	TU-015TT	TU-030DT	TU-030TT
Throughput	ton/D	1.8～3.2	4.4～7.7	5.4～9	13.2～22
Outside dimensions of the unit (W×L×H)	ｍ	1.9×9.9×2.8	2.2×12.2×2.8	2.8×15×2.9	2.8×16×3.2
Abrasive grain (SiC) recovery rate	％	90～95	90～95	90～95	90～95
Coolant recovery rate	％	90～95	90～95	90～95	90～95
Si removal rate	％	40～50	40～50	40～50	40～50