12.1″ graphic touch HMI with iX software and CODESYS soft control
- 12.1″ TFT-LCD touch screen
- 1280 × 800 (16:10)
Facts
General description
| Article number | 640002201 |
| Part status | Active |
Mechanical
| Mechanical size | 340 x 242 x 57 mm |
| Touch type | Resistive type |
| Weight | 2.5 kg |
| Housing material | Powder coated aluminum |
Power
| Input voltage | 24 VDC (18 – 32VDC) |
| Power consumtion | 22 W |
| Input fuse | Internal DC fuse, 3.15A slow |
Display
| Size diagonal | 12.0 inch |
| Resolution | 1280 X 800 pixels |
| Backlight | LED backlight |
| Backlight life time | 50,000 hrs |
| Backlight brightness | 400 cd/m2 |
| Backlight dimming | Industrial |
| Display type | TFT LCD |
Communication serial
| Number of serial ports | 2 Port combined 9pin DSUB with dual pin out |
| Serial port 1 | RS 232 (RTS/CTS) |
| Serial port 2 | RS 485 |
| Serial port 3 | RS 232 |
Ethernet communication
| Number of ethernet ports | 2 |
| Ethernet port 1 | 1×10/100 Base-T (shielded RJ45) |
| Ethernet port 2 | EtherCAT in CODESYS |
Environmental
| Operating temperature | -10 to + 50 °C |
| Storage temperature | -20 to + 70 °C |
| Shock | 10G 11ms half sine |
| Vibration | 0,7G RMS |
| Sealing front | IP65 |
| Sealing back | IP20 |
| Humidity | <85 % non-condensed |
Resources
Brochures
- Brochure: iX HMI SoftControl
- FR SoftControl campaign_flyer
- Brochure: iX HMI SoftMotion – Interface with motion
Knowledge
- CoDeSys – DUT variables defined as persistant will be set to its init value when restarting the TxA Softcontrol
- Codesys – Improvements in 3.5 SP2
- CoDeSys – TxA-SC and NA-9173 / NA-9473, Timeout when more then 1 slave
- CoDeSys – TxA-SC timeout example (Modbus RTU)
- iX – Fonts preinstalled in Panels operative
- iX – How to enter the Service Menu to set a new IP address, calibrate touch etc
- iX – How to set the IP-address on a TxA/TxB panel.
- iX – SoftControl – Declare Codesys persistent variables in GVL
- iX – Tutorial – How to setup a SIEMENS S7 ISO-on-TCP Controller in iX
- iX Panel TxA, TxB and TxC, batteries
- iX SoftControl – Communication protocols and ports used
- iX Txy-SC – Error message Read Timeout and Add Timeout
- Knowledge: CODESYS 3.5 SP2 and released version of iX TxA SoftControl
- Persistent variables in iX TxA-/TxB- SoftControlers
- RS422 on TxA and TxB SoftControl or SoftMotion panels
- TxA-SC – Name list import from CoDeSys to iX Developer (Data Types)
- iX – Printing from an iX Panel (over the network)
- Codesys – iX TxA-SC, TxB-SC – Used Persistent Memory
- TxA-SC – Modbus RTU/TCP slave error handling
- iX – Transparent Mode Qnn serial through an iX panel with Serial/IP
- How to check what battery type your TxA is equipeed with
- CoDeSys and iX TxA SoftControl – Modbus status signals
- Codesys (iX tags) – Importing Completed but no tags are imported Imported items: 0/0
- iX TxA/TxB SoftControl, How to set up ARTI controller in iX Developer to communicate with TxA/B SoftControl.
- TxA-SC, Max 3 Cyclic Task
- CoDeSys – How to backup variable values (Recipe Manager)
- CoDeSys – TxA-SC, Modbus Com status
- CoDeSys – TxA-SC, Trigger to start communication with a slave, Modbus RTU
- Restart of Codesys EtherCAT slave using code
Manuals
- iX T4A Installation manuals
- iX T10A Installation manuals
- iX T7A Installation manuals
- iX T12B Installation manuals
- iX T15B Installation manuals
- iX T7B Installation manuals
- BSD-L7N series user manual
Product information
- iX TxA SoftControl release notes
- TxB SoftControl LastMinutesNotes
- TxB SoftControl ReleaseNotes
Information document
- Remote Access Web applet blocked by security settings after updating Java 7 to Update 51 or later
Software
- CoDeSys 3.5 SP1 Patch 4 (required for TxA-/TxB-SoftControl)
- Downloads: iX and CODESYS for TxB SoftMotion
- CODESYS 3.5 SP3 Patch 3 (required for TxB-SoftMotion)
Drawings
- CAB105 Cable Drawing for TxA / TxB / TxC iX operator panel
- CAB106 Cable Drawing for TxA / TxB / TxC iX operator panel
- CAB107 Cable Drawing for TxA / TxB iX operator panel
- CAB109 Cable Drawing for TxA / TxB / TxC iX operator panel
- CAB111: iX TxA/TxB SoftControl RS232 cable to CREVIS I/O node
- CAB112: iX TxA/TxB SoftControl RS485 cable to CREVIS I/O node
- iX Panel T10A 3D Drawing
- iX Panel T4A Outline Drawing/Panel Cut-Out
- iX Panel T7A 3D Drawing
- iX Panel T7A Outline Drawing/Panel Cut-Out
- iX Panel T4A 3D Drawing
- CAB102 Cable Drawing for TxA / TxB / TxC iX operator panel
- CAB104 Cable Drawing for TxA / TxB / TxC iX operator panel
- CAB103 Cable Drawing for TxA / TxB iX operator panel
- CAB101 Cable Drawing for TxA / TxB / TxC iX operator panel
- CAB100 Cable Drawing for TxA / TxB / TxC iX operator panel
- iX Panel T10A Outline Drawing/Panel Cut-Out
Certificates
- DNV Certificate iX T7AM +CiX-CAN
- iX Panel T4A Declaration of Conformity EMC
- iX Panel T7A Declaration of Conformity EMC
- iX TxA-SC DoC DNV (PROD CERT – 1033774 – 1 – A1) – 1
- iX Panel T10A Declaration of Conformity EMC
- Declaration of conformity iX Panel TxA
System program
- iX TxA SoftControl Image 1.1
- iX TxA-SC Image 1.11
- iX TxB SoftControl image
Configuration files
- iX TxA SoftControl, Device Description
- TxA-SC – Install Device description file in CoDeSys
- iX TxB SoftControl, Device Description
- iX TxB SoftMotion, Device description
Program examples/Quickstarts
- Start-up: IPsec VPN tunnel to iX panel (KI00333)
- Start-up: iX TxA SoftControl, Basic setting (KI00326)
- Start-up: iX TxA SoftControl, FnIO-S NA-9173 / NA-9473 Modbus RTU (KI00327)
- Start-up: iX TxB SoftControl, NA-9173/NA-9473 Modbus RTU (KI00331)
- TxB SoftControl: Program example, iX T7B SoftControl controls BFI-H2/P2 via EtherCat
- Start-up: iX TxB SoftControl, NA-9286 EtherCAT (KI00329)
- Start-up: iX TxB SoftControl, FnIO-S Serie ModbusTCP (KI00330)
- Start-up: iX TxB SoftControl, Basic Setting (KI00328)
- Start-up: iX TxB SoftMotion, Basic Setting (KI00353)
Đánh giá
Chưa có đánh giá nào.