Đại lý Proface tại Việt Nam
HMI Proface | AGP4104
Màn hình cảm ứng HMI Proface
Performance Specifi cations
| Model | AGP4104-G1-D24 | AGP4104-W1-D24 | ||||||||||
| Display | Type | 3.4” Monochrome LCD | ||||||||||
| Colors | Green / Orange / Red (16 shades) | White / Pink / Red (16 shades) | ||||||||||
| Backlight | LED (service life: Green/White 50,000 hrs., Red 10,000 hrs. at 25°C and 24hr. operation) | |||||||||||
| Resolution | 200 x 80 pixels | |||||||||||
| Brightness Adjustment | 16 levels of adjustment available via touch panel | |||||||||||
| ContrastAdjustment | 8 levels of adjustment available via touch pane | |||||||||||
| Touch Panel | Resistive Film (Analog) 1024 x 1024 | |||||||||||
| Memory | Application | 2.2MB Flash EPROM | ||||||||||
| Data Backup | No Internal backup SRAM | |||||||||||
| Interfaces | Ethernet Interface | 1x IEEE802.3u Ethernet port 10BASE-T / 100BASE-TX Modular jack RJ-45 | ||||||||||
| Serial Interface | None. Serial Devices can be addressed through a second, Master, AGP3000 using the High Speed Multilink Feature (See GP-Pro EX development software documentation for details) | |||||||||||
| USB Interface | 1x USB 2.0 (Host) Type A (for PC or USB Memory project transfer and Barcode Input) 1x USB 2.0 (Host) Type mini-B (for project transfer) | |||||||||||
General Specifications
| Model | AGP4104-G1-D24, AGP4104-W1-D24 | ||||||||||||
| Electrical | Input Voltage | 24V DC | |||||||||||
| Rated Voltage | 19.2V DC to 28.8V DC | ||||||||||||
| Power Consumption (without USB devices) | 2.7W or less | ||||||||||||
| Power Consumption (powering USB devices) | 6.0W or less | ||||||||||||
| Environmental | Ambient Operating Temp. | 0°C (32°F) to 50°C (122°F) | |||||||||||
| Storage Temperature | -20°C (-4°F) to 60°C (140°F) | ||||||||||||
| Humidity | 10%RH to 90%RH (non-condensing, wet bulb temperature: 39°C (102°F) or less) | ||||||||||||
| Altitude Operation | 800hPa to 1114hPA (2000 meters above sea level or lower) | ||||||||||||
| Vibration & Shock Resistance | IEC/EN61131-2 compliant 5 to 9 Hz single-amplitude 3.5 mm [0.14 in.] 9 to 150 Hz constant-accelerated velocity 9.8 m/s² X,Y, Z directions for 10 cycle (100 minute) | ||||||||||||
| Structural | Ratings | Equivalent to IP65f, Nema #250 Type 4x/13 | |||||||||||
| Certifications | UL/c-UL Listed, CSA (UL508, CSA-C22.2 No.142-M1987), CE EN61000-6-2, EN61000-6-4, EN61131-2, RoHS | ||||||||||||
| External Dimensions | W 116.5mm [4.59in] X H 77.5mm [3.05in] X D 28mm [1.1in] | ||||||||||||
| Weight | 0.2kg [0.4lb] | ||||||||||||
| Warranty | |||||||||||||
Communication Capability
| Ethernet Drivers (Direct Connection) | Serial connections through Ethernet (Requires 2nd AGP3000) | ||||||||||
| Rockwell Automation | EtherNet/IP (Native Tag) | Rockwell Automation | DF1 | ||||||||
| Siemens AG | SIMATIC S7 Ethernet | DH485 | |||||||||
| Schneider Electric | Modbus TCP Master | Siemens AG | SIMATIC S7 MPI Direct | ||||||||
| Modbus TCP Slave | GE | Series 90-30/70 SNP & SNP-X | |||||||||
| Modbus-IDA | General Modbus TCP Master | Modbus-IDA | General Modbus SIO Master | ||||||||
| ODVA | EtherNet/IP Explicit Messaging | Schneider Electric | Modbus SIO Master (RTU) | ||||||||
| Omron Corporation | CS/CJ Series Ethernet | Modbus SIO Slave | |||||||||
| CS/CJ Series EtherNet/IP | Omron Corporation | CS/CJ Series HOST Link | |||||||||
| Yaskawa Electric | MP Series Ethernet | Mitsubishi Electric | A, FX, Q, QnA, QUTE Series CPU Direct | ||||||||
| Koyo Electronics / Automation Direct | Kostac / DL Series Modbus TCP | IAI Corporation | ROBO CYLINDER Modbus SIO | ||||||||
| Mitsubishi Electric | Q/QnA Series Ethernet | X-SEL Controller | |||||||||
| FX Series Ethernet | The list above is a small selection of the many drivers that are supported by the AGP4104 HMI. In addition tto these drivers the AGP4104 Series HMI support USB code readers and USB Storage Devices for Project Transfer without PC. Pro-face continuously adds and updates drivers and makes these available free of charge on the Otasuke-Pro! Technical Support website. For a full list of supported drivers, new drivers and updates visit: https://www.hmisource.com/otasuke/download/update | ||||||||||
| Q Series QnU CPU Ethernet | |||||||||||
| Digital Electronics | Memory Link Ethernet | ||||||||||
| General Ethernet | |||||||||||
| Keyence | KV-700/1000/3000/5000 Ethernet | ||||||||||
| Hitachi | S10V Series Ethernet | ||||||||||
| H Series Ethernet | |||||||||||
Ordering Information (4100 Series)
| Part Number | Description | ||||||||
| AGP4104-G1-D24 | 3.4” Mono (Green/Orange/Red), 1 Ethernet Port, 2 USB, 24VDC | ||||||||
| AGP4104-W1-D24 | 3.4” Mono (White/Pink/Red), 1 Ethernet Port, 2 USB, 24VDC | ||||||||
| AGP4105-G1-D24 | 3.4” Mono (Green/Orange/Red), 1 Serial RS232C, 2 USB, 24VDC | ||||||||
| AGP4105-W1-D24 | 3.4” Mono (White/Pink/Red), 1 Serial RS232C, 2 USB, 24VDC | ||||||||
| AGP4106-G1-D24 | 3.4” Mono (Green/Orange/Red), 1 Serial RS422/485, 2 USB, 24VDC | ||||||||
| AGP4106-W1-D24 | 3.4” Mono (White/Pink/Red), 1 Serial RS422/485, 2 USB, 24VDC | ||||||||
| AGP4107-G1-D24 | 3.4” Mono (Green/Orange/Red), 1 Serial RS485(MPI), 2 USB, 24VDC | ||||||||
| AGP4107-W1-D24 | 3.4” Mono (White/Pink/Red), 1 Serial RS485 (MPI), 2 USB, 24VDC | ||||||||
Optional Items (4100 Series)
| Part Number | Product Name | ||||||||
| EX-ED-Vxx | Screen Editor Software (Limited Edition) | ||||||||
| Note: Limited Edition of GP-Pro EX (V2.6 or later) can be used to program the AGP4100 Series. Please visit www.profaceamerica.com to download this fully functional Limited Edition (previously called “Trial version”) | |||||||||
| ZC9USCBMB1 | Transfer/Programming Cable USB: HMI type mini-B Port to PC USB type A Port | ||||||||
| ZC9USEXMB1 | USB type mini-B Front Panel Access Cable: 1M | ||||||||
| CA5-USBEXT-01 | USB type A Front Panel Access Cable: 1M | ||||||||
| ZC9DS31 | Touch Screen Protection Sheet (Qty 5) | ||||||||
| ZC9USCL1 | USB Cable clamp (Qty 5) type A USB port | ||||||||
| ZC9USCLMB1 | USB Cable clamp (Qty 5) type mini-B USB port | ||||||||
| ZC9WG31 | Replacement Gasket | ||||||||
| ZC9AF31 | Replacement Mounting Fasteners, 1 set of 2 | ||||||||
| ZC9CMC1 | Replacement Serial Interface Connector for 4105/4106 | ||||||||
| CA6-USB232-01 | Converts USB type A to 9 pin D-Sub RS-232C Serial Port | ||||||||
| HMI-CAB-ETH | Ethernet Crossover cable, 6ft | ||||||||
| ZC9CBQ31 | RS232C Cable, 3M, 4105 to Mitsubishi PLC Q Series | ||||||||
| ZC9CBFX11 | RS422/485 Cable, 1M, 4106 to Mitsubishi PLC FX Series | ||||||||
| ZC9CBFX51 | RS422/485 Cable, 5M, 4106 to Mitsubishi PLC FX Series | ||||||||
| ZC9CBA51 | RS422/485 Cable, 5M, 4106 to Mitsubishi PLC A Series | ||||||||
| ZC9CBFP21 | RS232C Cable, 2M, 4105 to Panasonic FP Series PLC | ||||||||
| Note: Serial cables for AGP4105/4106 and 4107 only, Ethernet cable for AGP4104 only Caution: Before operating any of these products, please be sure to read all related manuals thoroughly. – All product names used in this document are trademarks or registered trademarks of their respective companies. – All information contained in this document is subject to change without notice. | |||||||||
Đánh giá
Chưa có đánh giá nào.